* ECU Coding: 

Match, learn, or code the newly replaced ECU; Customize your car, unfold the hidden features, or disable the annoying functions; Reprograms the adaptive data for certain components after repairs or replacements.

 * ECU Coding , Bi-directional Control/Active Test : 

Actuate solenoids and actuators for active testing, send commands to systems/components to test their working status, without using the vehicle controls.

 * 34+ Hot Maintance Functions：

With 34+ maintenance functions, save you a lot of time and high maintenance cost. Including Oil  Reset, SAS Calibration, IMMO Keys, ABS Bleeding, SRS, Injector Coding, Battery Registration, DPF Regeneration, Cooland  bleeding, Tyre rest, Gear learning, etc, and still growing.

 * Full System Diagnosis:

 Compared with ordinary four-system scanners, ANCEL DS700 supports all system diagnostics for a full scan of the car's available control modules: ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, ESP, Transmission, Fuel System, Light System and A/C system etc. The automotive scanner provides workshops, technicians and enthusiasts alike unbeatable value.

 * Remote Diagnosis Support: 

When you encounter any technical or operational problems, our technical team will give you instant support by Team Viewer remote control, saving your time and effort of communicating back and forth by email and improving the efficiency of problem-solving.

 * 6+ Exclusive Modules: 

ANCEL DS700 support optional fucntions modules to meet advanced tecnician, including Work light, video scope, moduledock, thermal imager, battery tester, scope box(Note: you need to buy tools extra).

 * 99% of Vehicles Coverage: 

ANCEL DS700 supports almost all vehicles (UP TO 2019/2020/2021) cover 12v OBDI & OBDII cars such as SUV, minivan,12v light-duty truck, and hybrids,etc.

 * Full OBD2 Function:

 ANCEL DS700 diagnostic scan tool includes all what a popular OBDII scanner has: Read/Erase Codes, Freeze Frame, Live Data, Vehicle Info, O2 Sensor Test, On-Board Monitor Test, I/M Readiness Status, Component Test,DTC Lookup. To own ANCEL DS700, to save an OBDII code reader for you.

 * Full Connector Kit: 

There is a specific description below.

 * 23 Languages Supported: 

English, German, Spanish, French, Italian, Japanese, Portuguese, Russian, Polish, Turkish, Dutch, Hungarian, Korean, Danish, Greek, Arabic, Persian, Romania, Serbia, Finnish, Swedish, Czech, Chinese(traditional)

ANCEL DS700,based on the Android 10 System,is a new generation of modular high-end intelligent diagnostic equipment developed by ANCEL, featuring fully updated software's and powerful design of widespread vehicle coverage.

Abundant professional diagnostic features and exceptional hardware configuration etc., is the ideal scanner for professional

mechanics and auto repair stores to perform all-around fixes and comprehensive tests.

Support ECU Coding and Active Test(Bi-directional)

The ECU Coding of this diagnostic tool can work on most vehicle makes. It is used to reprogram adaptive data for vehicle control

modules after repairs or replacements of vehicle parts.

The Active Test function is used to access vehicle-specific subsystem and component tests. Available test vary by manufacturer,

year, and model, and only the available tests display in the menu.

Support  Full System Diagnostic

Brake System :if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

Emission System :if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

Fuel system :if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

Transmission System :if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

Wiper System :if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

Light System :if you see rapid signal blinking or dimming lights.

DS700 Support 34 Special Reset Function, Will Be Your Powerful Assistant :

1.Oil Reset

<!-- The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset the mileage or driving time to zero after the maintenance,so the maintenance light will go out and the system will start a new maintenance cycle. -->

2.DPF Regeneration

DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.

DPF regeneration may be performed in the following cases:

a)The exhaust back pressure sensor is replaced.

b)The PM trap is removed or replaced

c)The fuel additive nozzle is removed or replaced

d)The cataytic oxidizer is removed or replaced.

e)The DPF regeneration MIL is on and maintenance is performed.

f)The DPF regeneration control module is replaced.

3.AFS(headlamp) Reset

The feature is used to initialize the adaptive headlamp system.According to the ambient light intensity,the adaptive headlamp system may decide whether to automatically turn on the headlamps,and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.

4.EGR Adaption

This function is used to learn the EGR(Exhaust Gas Recirculation)valve after it is cleaned or replaced.

5.Brake-pad Reset

If the brake pad wears the brake pad sense line,the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad,you must reset the brake pad.Otherwise,the car alarms.

Reset must be performed in the following cases:

a)The brake pad and brake pad wear sensor are replaced.

b)The brake pad indicator lamp is on.

c)The brake pad sensor circuit is short,which is recovered.

d)The servo motor is replaced.

6.IMMO Service

To prevent the car being used by unauthorized keys,the anti-theft key matching function must be performed so that the immoblizer control system on the car identifies and authorizes remote control keys to normally use the car.When the ingnition switch key,ignition switch,combined instrument panel,ECU,BCM,or remote control battery is replaced,anti-theft key matching must be performed.

7.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.

8.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

9.Steering Angle Reset

To reset the steering angle,first find the relative zero point position for the car to drive in straight line.Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor ,replacing steering mechanical parts(such as steering gearbox,steering column,end tie rod,steering knuckle),performing four-wheel alignment,or recovering car body,you must reset the steering angle.

10.Injector Coding

Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that cylinder can better indentify injectors to accurately control fuel injection.

11.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

12.Transport Mode

In order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.

13.Battery Matching

This function enables you to perform a resetting operation on the monitoring unit of vehicle battery,in which the original low battery fault information will be cleared and battery matching will be done.

Battery matching must be performed in the following cases:

a)Main battery is replaced.Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information.If the related control module detects false information,it will invalidate some electric auxiliary functions,such as automatic start&stop function,sunroof without one-key trigger function,power window without automatic function.

b)Battery monitoring sensor.Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately,which can avoid an error message displaying on the instrument panel.

14.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.When the vehicle collides and the airbag deploys,the corresponding fault code of the colision data appears,the airbag indicator lights up,and the fault code can't be cleared.Since the data inside the airbag computor is disposable,it is required that all new accessories must be ewplaced,but after performing this function,the data of the airbag computer can be recovered and the fault code can be cleared,the airbag light will go out,and the airbag computer can continue to use.

15.Tyre Reset

This function is used to set the size parameters of the modified or replaced tire.

16.Mileage Reset

a)Mileage Reset is to copy ,write,or rewrite the value of kilometers in the chip of KM by using a car diagnostic computer and data cable,so that the Mileage shows the actual mileage.

b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or KM failure,it is necessary to do Mileage Reset after maintenance.

17.ABS Bleeding

When the ABS contain air,the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.If the ABS computer,ABS pump,brake master cylinder,brake cylinder,brake line,or brake fluid is replaced,the ABS bleeding function must be performed.

18.Gear Learning

19.Language Change

This function is used to change the system language of the vehicle central control panel.

20.Adblue Reset

After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.

21.Elec. Throtle Adaption

22.Suspension Matching

This function can adjust the height of the body.When replacing the body height sensor in the air suspension system,or control module or when the vehicle level is incorrect,you need to perform this function to adjust the body height sensor for level calibration.

23.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

24.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (NOx)in engine exhaust.If the NOx fault is re-initialized and the NOx catalytic converter is replaced,it is necessary to reset the catalytic converter learned value stored in the engine ECU.

25.TPMS Reset

26.AT Learning

27.Sunroof Initialization

This function can set the sunroof lock off,closed when it rains,sliding/tilting sunroof memory function,temperature threshold outside the car etc.

28.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware)

29.GPF regeneration

30.Intelligent cruise control system

Dynamic calibration

31.Electric shock angle position calibration

32.Engine power balance 

Read power function

33.Automatic air conditioning initialization

34.High-voltage battery health detection

Support some systems of new energy vehicles, if you need this function, please contact our staff

And many more......